Products
 |
Cuplock System Scaffolding Cuplock system scaffolding has been designed to meet the requirements of the construction and housing industries. Standards / Vertical Brace (Spigotless)
Cuplock scaffolding spigotted standards are principally used in access scaffolding applications and also as a base structure for formwork support applications. They have cup joints at 500mm intervals. The captive mobile top cups are designed to endure rough site handling and welded bottom cups are made from high-quality steel. Integral spigots, 150mm long, are provided at the top of each standard for making vertical connections. The spigots and the base of each standard incorporate 16mm dia. holes to enable use of locking pins to join standards where necessary.
Size:
Ledger / Horizontal Ledger
 The Ledgers are manufactured from 48.3mm O.D. tube with forged steel blade ends which locate into bottom cups of the standards and are locked in place by the corresponding top cups. Ledgers are available in various lengths to provide the desired grid dimension for scaffolding or formwork. Production of the ledger since 1997 has been from thinner high grade steel tube. This contributes to a higher ledger for easier handling. Ledgers manufactured prior to 1997 are made from the thicker wall tube and weigh approx. 20% heavier than the weights stated below.
Size:
Cuplock Scaffolding Transom
 Cuplock system scaffolding transoms are fabricated from twin structural angles fixed back to back with a drop forged blade attached to each end. The 2.44m Transom has an additional web member welded below the flange section for added strength. The transom blade locates into a bottom cup and is locked in position by the top cup. The outward standing bottom leg of the angles supports the steel planks in a captive manner. Available in various lengths to suit scaffolding and formwork applications.
Size:
Cuplock Omega Transom
 Omega Transoms manufactured from press bent section with flange type extensions on both sides provides a strong support for working platform with Cuplock steel battens.
Size:
Cuplock Intermediate Transom
 For use with Hop-up brackets where distance between standards exceeds the span of scaffold boards Cuplock intermediate transoms are available for 2 boards and 3 boards.
Size:
We supply all kinds of Cuplock System Scaffolding such as Screw Jacks,Heavy Duty Swivel Base,Socket Base, Castors ,Swivel Clamp Braces ,Swivel Face Braces,Cantilever A Frame and Extension Adapter ,Galvanised Steel Gratings,Board Brackets,Single Board and Multiple (2, 2.5 or 3) Board units, Heavy Duty Swivel Base, Cantilever A Frame and Extension Adapter ,Galvanised Steel Gratings,Board Brackets,Single Board and Multiple (2, 2.5 or 3) Board units,Intermediate Transoms ,Half-Coupler Braces - 9'10" and 10'6", Steel Ladders - 5' and 10' Units (Wide), Ladder Bracket (Wide) , Locking Pins ,Stair Units - Aluminum Stringers and Stair Treads and so on. Cuplock scaffolding - Easy to erect
No wedges - just a simple locking cup at each node point on the standards enables connection of the ends of up to four members in one locking action. Cuplock scaffolding - Versatile in use It is suitable for access or formwork support with an extensive range of special applications. Cuplock scaffolding - Proven design with safety accessories The Cuplok system has a proven performance history on an extensive number of sites, meeting the requirements of the various statutory bodies Please contact us at sales@metecmetal.com for more information.
|
 |
Wuxi Metec metal Co.,Ltd(No.804,Lihu Building,No.168,Lihu Road,Wuxi,China) ICP:09057145 Tel:0086-510-85138020; Fax:0086-510-85130100 Technical support:Infowuxi  |